Acer P5271i User Manual - Page 55
Replacing the Lamp
View all Acer P5271i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
English 43 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp. Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp. OPEN OPEN LENS SHIFT PROJECTOR OPEN Lens Shift Control 1 LENS SHIFT PROJECTOR 2 OPEN Lens Shift Control 1 4 3 LENS SHIFT PROJECTOR OPEN Lens Shift Control 2 To Change the Lamp 1 Turn off the projector by pressing the power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Find the "OPEN" buttons on both sides of the projector and push it at the same time. (Illustration #1) 5 Open the top cover. (Illustration #2) 6 Remove the two screws that secure the lamp moduleX and pull up the lamp barY.(Illustration #3) 7 Pull out the lamp module by force. (Illustration #4) To replace the lamp module, reverse the previous step. Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.