Home » Acer Manuals » Desktops » Acer Aspire T320 » Manual Viewer

Acer Aspire T320 Aspire T320 Service Guide - Page 72

Reset Resource, Assignments, PnP/PCI Options, BIOS Messages, Action/FRU

Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

BIOS Messages IDE Drive 0 Error IDE Drive 1 Error IDE Drive 2 Error IDE Drive 3 Error IRQ Setting Error Expansion ROM Allocation Fail I/O Resource Conflict(s) Memory Resource Conflict(s) PCI Device Error PS/2 Pointing Device Interface Error PS/2 Pointing Device Error DMI Table Was Destroyed Press "DEL" key to enter Setup or F1 key to continue Press ESC to turn off NMI, or any key to reboot Insert system diskette and press ENTER key to reboot Action/FRU 1. Enter BIOS Setup and load the default settings. 2. Check IDE drive jumper. 3. IDE hard disk drive power. 4. IDE hard disk drive cable/connection. 5. IDE hard disk drive. 1. Load default settings in Setup. 2. Enter BIOS Setup and set the Reset Resource Assignments of the PnP/PCI Options to Yes, then reboot the system. 3. Remove all adapter cards that are NOT factoryinstalled, then reboot the system 1. Load default settings in Setup. 2. Enter BIOS Setup and set the Reset Resource Assignments of the PnP/PCI Options to Yes, then reboot the system. 3. Remove all adapter cards that are NOT factoryinstalled, then reboot the system. 1. Re-connect PS/2 keyboard and mouse. 2. Enter BIOS Setup and load the default settings. 3. PS/2 mouse 4. PS/2 keyboard 5. System board 1. Flash BIOS 1. Press DEL to enter Setup and reconfigure the system. 1. Press ESC to reject NMI error or press any other key to reboot the system. 1. Insert a bootable disk into the floppy disk drive or remove this disk if a hard disk is installed. 65 Chapter 4

Section	Page
Aspire T320	1
Revision History	2
Copyright	3
Disclaimer	3
Conventions	4
Preface	5
T.O.C	6
CH1_System Specifications	8
Overview	8
Features & Specifications	9
Aspire T320 Front Panel	11
Aspire T320 Rear Panel	12
MainBoard Layout	13
Block Diagram	15
Hardware Specifications and Configurations	16
Power Management Function	23
CH2_System Utilities	24
Entering Setup	25
Product Information	27
Standard CMOS Features	28
Advanced BIOS Features	30
Advanced Chipset Features	33
Integrated Peripherals	35
OnChip IDE Device	36
Onboard Device	38
Super IO Device	39
Power Management Setup	40
PnP/PCI Configuration	43
PC Health Status	44
Frequency/Voltage Control	45
Load Default Settings	46
Set Supervisor/User Password	47
Save & Exit Setup	48
Exit Without Saving	49
CH3_Machine Disassembly and Replacement	50
General Information	51
Before You Begin	51
Disassembly Flow Chart	52
Standard Disassembly Procedure	53
Removing the Front Panel	53
Removing the Cables	53
Removing the Modem card, CD-ROM, Floppy and HDD	54
Removing the Power Supply	55
Removing the Heatsink and the CPU	56
Removing the Memory	56
Removing the Mainboard	57
Removing the Power Button	57
Removing the LED Module	57
Removing the Daughter Board	57
Standard Reassembly Procedure	58
Installing the Daughter Board	58
Installing the LED Module	58
Installing the Power Button	58
Installing the Mainboard	58
Installing the Heatsink and the CPU	59
Installing the Memory	59
Installing the Power Supply	60
Installing the Modem card, CD-ROM, Floppy and HDD	60
Installing the Cables	61
Installing the Front Panel	62
Closing the System	62
CH4_Troubleshooting	63
Power-On Self-Test (POST)	64
POST Check Points	65
POST Error Messages List	71
Error Symptoms List	73
CH5_Jumper and Connector Information	78
Checking Jumper Settings	78
Setting Jumpers	78
Connectors and Jumpers	79
Function Definition	80
Pin Definition	81
Jumper Setting	81
Connectors and Headers Definition	81
Expansion I/O	84
CH6_FRU (Field Replaceable Unit) List	87
Exploded Diagram	88
Parts	89
AppB_Test Compatible Components	97
Microsoft Windows XP Home Environment Test	98

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.