Adaptec 2740A User Manual - Page 25
Unpacking and Inspection
View all Adaptec 2740A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
AHA-2740 Series User's Manual The On-board Floppy Controller (AHA-2742/2742T Only) The on-board floppy controller on the AHA-2742/2742T is enabled by default and is controlled by Jumper J4. • If your floppy diskette drives are already running under another controller, disable the on-board floppy controller by removing the jumper shunt on Jumper J4 • To use the on-board floppy controller, leave the jumper shunt installed on Jumper J4 and then disable your existing floppy controller; refer to your computer or floppy controller user documentation Unpacking and Inspection Your host adapter should be undamaged when you receive it. The carrier or distributor where you purchased the host adapter is responsible for any damage incurred during storage or shipment. In case of damage, return the host adapter to your distributor; if the host adapter was delivered to you directly, have the carrier note the damage on both the delivery receipt and the freight bill, then notify the freight company representative so that the necessary insurance claims can be initiated. Caution The host adapter is extremely sensitive to static electricity; even a mild shock can destroy a component on the board. Keep the host adapter in its conductive wrapping until you are ready to install it in your system. Before handling the host adapter, always ground yourself by touching the system chassis of your computer. 1-8 Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 1-8) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93