Adaptec 2740A User Manual - Page 60
Host Adapter SCSI ID
View all Adaptec 2740A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Configuring the Host Adapter Host Adapter SCSI ID Select Host Adapter SCSI ID to configure the SCSI ID (0-7) setting for the host adapter. Figure 3-6 displays your choices. The default setting is 7. Each installed SCSI device must have a unique SCSI ID. SCSI ID 7 is normally assigned to the host adapter; SCSI IDs 0 and 1 should be reserved for SCSI hard disk drives. If two host adapters are installed, each would have its own SCSI bus, thus each host adapter would still be set to SCSI ID 7. Refer to Chapter 2, Getting Started for additional information on SCSI ID. SCSI Channel A Configuration Host Adapter SCSI ID ( )7 ( )6 ( )5 ( )4 ( )3 ( )2 ( )1 ( )0 Done=F10 Figure 3-6. Selecting Host Adapter SCSI ID Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 3-9) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93 3-9