Adaptec 2740A User Manual - Page 50

Before Re-booting Your System, Reassemble the System

Get Adaptec 2740A - AHA Storage Controller Fast SCSI 10 MBps PDF manuals and user guides View all Adaptec 2740A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Getting Started Before Re-booting Your System Before re-booting your system and configuring your host adapter, make sure you have completed the following: ® 1 The SCSI bus is properly terminated. 2 Each SCSI device on the SCSI bus is set to a unique SCSI ID between 0 and 7. 3 The host adapter is firmly seated in the host computer's EISA slot. 4 Internal SCSI devices are connected to the host adapter with the 50-pin SCSI ribbon cable and that proper Pin 1 orientation is maintained. 5 External SCSI devices are properly installed and cabled. 6 If using the on-board floppy controller on the AHA-2742/2742T, the floppy diskette drive is connected to the host adapter with the 34-pin SCSI ribbon cable and that proper Pin 1 orientation is maintained. 7 All system and power cables are properly connected. Reassemble the System Refer to your system and SCSI device documentation to replace the system cover and connect all system and SCSI device power cables. Ì Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 2-23) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93 2-23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
Before Re-booting Your System
Before re-booting your system and configuring your host adapter,
make sure you have completed the following:
1
The SCSI bus is properly terminated.
2
Each SCSI device on the SCSI bus is set to a unique SCSI ID
between 0 and 7.
3
The host adapter is firmly seated in the host computer’s EISA
slot.
4
Internal SCSI devices are connected to the host adapter with
the 50-pin SCSI ribbon cable and that proper Pin 1 orientation
is maintained.
5
External SCSI devices are properly installed and cabled.
6
If using the on-board floppy controller on the AHA-2742/2742T,
the floppy diskette drive is connected to the host adapter with
the 34-pin SCSI ribbon cable and that proper Pin 1 orientation
is maintained.
7
All system and power cables are properly connected.
Reassemble the System
Refer to your system and SCSI device documentation to replace
the system cover and connect all system and SCSI device power
cables.
Adaptec AHA-2740 Series User’s Manual
Stock Number:
510381-00
/
Rev. C
(Page 2-23)
Print Spec Number:
491709-00 Rev C
Current Date:
9/1/93
ECN Date:
9/14/93
Getting Started
2-23