Adaptec FS4500 User Guide - Page 58
Supported Fibre Channel Disk Drives, Fibre Channel Cables, Copper Cables
UPC - 760884144275
View all Adaptec FS4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Fibre Channel Storage Enclosures (FC4100) Supported Fibre Channel Disk Drives ■ 7.2, 10, and 15 K RPM hot-pluggable FC disk drives ■ SCA-2, 40-pin connector. ■ FC Arbitrated Loop (FCAL) 1 or 2 Gb/sec ■ 3.5" form factor, 1" high ■ Downloadable firmware ■ Drive device control bits for 1, 2 and other FCAL controlled by Storage Enclosure ■ Speed operations ■ +5 and +12 VDC on the drive connector Fibre Channel Cables This section describes the cables supported by the Adaptec FC Storage Enclosure. Copper Cables FCAL copper cables up to 10 meters long can be used between the host and the enclosure. FCAL copper cables up to 5 meters can be used between enclosures for loop expansion. The 10 meter copper cable length is supported with any number of disk drives installed at an enclosure speed of 1 Gb/sec. Copper cabling between shelf enclosures requires SFP-to-SFP copper cables having the lengths specified in Table 6-1 on page 6-4. An optical interface I/O SFP module can be used to achieve FC optical cable lengths. For 2 Gb/sec speeds, FCAL copper cables up to 5 meters in length can be used between the host and the enclosure, and between enclosures. These cable lengths are supported with any number of disk drives installed. An optical interface I/O SFP module can be used to achieve FC optical cable lengths. The supported cables are shown in Table 6-2 on page 6-4. 6-3