Airlink AMPS230 Quick Installation Guide - Page 5

Configuring the Printer Server - software

Page 5 highlights

Step 6 Once the installation is complete, make sure that the Launch PS-Link box is checked and click Finish. Section 3 Configuring the Printer Server Note: The following steps only need to be performed one time from one computer. Step 1 Click the Discover button and your printer should show up under Server Name. If your print server does not show up, check all power and network cable connections to the printer. You may also need to disable any software firewalls you have on your computer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

Step 6
Once the installation is complete, make sure that the
Launch PS-Link
box is checked and click
Finish
.
Configuring the Printer Server
Note:
The following steps only need to be performed
one time
from one
computer.
Step 1
Click the
Discover
button and your printer should show up under
Server Name
.
If your print server does not show up, check all power and
network cable connections to the printer.
You may also need to disable any
software firewalls you have on your computer.
Section 3