Airlink APO1000 Quick Installation Guide - Page 6

Getting Started APO1000/APO1010 supports web-based configuration. Upon the completion of hardware installation, APO1000/APO1010 can be configured through a PC or Laptop by using its web browser such as Internet Explorer or Mozilla Firefox. ¾ Default IP Address : 192.168.2.254 ¾ Default IP Netmask : 255.255.255.0 ¾ Default User Name and Password : The default user name and password for both root manager account and admin manager account are as follows : Mode CPE Mode AP Mode WDS Mode Client Bridge + Universal Repeater Mode Management Account Root Admin Root Account Account Account Root Account Root Account User Name root admin root root root Password default admin default default default Step „ IP Segment Set-up for Administrator's PC Set the IP segment of the administrator's computer to be in the same range as APO1000/APO1010 for accessing the system. Do not duplicate the IP Address used here with IP Address of APO1000/APO1010 or any other device within the network Example of Segment : The valid range is 1 ~ 254 and 192.168.2.254 shall be avoided because it is already assigned to APO1000/APO1010. 192.168.2.10 is used in the example below. ¾ IP Address : 192.168.2.10 ¾ IP Netmask : 255.255.255.0 „ Launch Web Browser Launch web browser to access the web management interface of system by entering the default IP Address, http://192.168.2.254, in the URL field, and then press Enter. 5