Airlink APSUSB2 Manual - Page 6

External Features - support

Get Airlink APSUSB2 PDF manuals and user guides View all Airlink APSUSB2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

NetWare 5.x NDPS LPR Remote Printing ♦ NetBEUI Windows NT/2000/XP, Windows 95/98/Me, Windows for Workgroups, Microsoft LAN Manager, IBM LAN Server ♦ AppleTalk MacOS EtherTalk Windows-based setup and administration software, PS Admin, is supplied with the Print Server, making configuration and management quick and easy. The Print Server also supports configuration and management via the telnet protocol for networks without Windows-compatible machines. External Features This section describes the externally visible features of the Print Server. Port Connectors The Print Server's three printer ports are located on its rear panel. One USB and two identical parallel ports are labeled USB, LPT1 and LPT2. These printer ports are independently configurable using the PS Admin program or the print server's telnet interface. (See the PS Admin User's Guide for information about configuring the print server's ports.) The print server also supports web configuration permitting users to configure settings through the web browser. Default IP address as follows: ♦ Default IP address - 192.168.0.1 ♦ Subnet Mask - 255.255.255.0 Note: The PC's IP address must correspond with the print server's IP address in the same segment for the two devices to communicate. Power LPT2 LPT1 USB RJ-45 Rear Panel Connectors

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
NetWare 5.x NDPS LPR Remote Printing
♦
NetBEUI
Windows NT/2000/XP, Windows 95/98/Me, Windows for Workgroups, Microsoft LAN
Manager, IBM LAN Server
♦
AppleTalk
MacOS EtherTalk
Windows-based setup and administration software,
PS Admin
, is supplied with the Print Server,
making configuration and management quick and easy.
The Print Server also supports configuration
and management via the
telnet
protocol for networks without Windows-compatible machines.
External Features
This section describes the externally visible features of the Print Server.
Port Connectors
The Print Server’s three printer ports are located on its rear panel. One USB and two identical parallel
ports are labeled USB, LPT1 and LPT2.
These printer ports are independently configurable using the
PS Admin
program or the print server’s
telnet
interface. (See the
PS Admin User’s Guide
for
information about configuring the print server’s ports.)
The print server also supports web configuration permitting users to configure settings through the
web browser.
Default IP address as follows:
♦
Default IP address – 192.168.0.1
♦
Subnet Mask – 255.255.255.0
Note:
The PC’s IP address must correspond with the print server’s IP address in the same segment for
the two devices to communicate.
Power
LPT2
LPT1
USB
RJ-45
Rear Panel Connectors