Airlink AR660W3G User Manual - Page 67
Remote Management
UPC - 658729081659
View all Airlink AR660W3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
After you clicked Apply, the following message will be displayed on your web browser: You can click "Continue" to back to previous setup page to continue on other setup procedures, or click "Apply" to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting). 3.6.3 Remote Management Enable the remote management so an authorized user can configure the Router from a remote site with its WAN IP address. You can specify a port for the remote management. Parameters Host Address Port Enabled Description Input the IP address of the remote host you wish to initiate a management access. You can define the port number this router should expect an incoming request. If you‟re providing a web service (default port number is 80), you should try to use other port number. You can use the default port setting "8080", or something like "32245" or "1429". (Any integer between 1 and 65534) Select the field to start the configuration After you finish with all settings, please click "Apply" button. 68