Airlink AR675W User Manual - Page 41

IP address, Subnet Mask, Default Gateway, DHCP Client Range, 1d Spanning Tree

Get Airlink AR675W PDF manuals and user guides
UPC - 658729081604
View all Airlink AR675W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Parameters IP address Default 192.168.2.1 Subnet Mask Default Gateway DHCP 255.255.255.0 Server DHCP Client Range 802.1d Spanning Tree Disabled Description This is the router's LAN IP address (Your LAN clients default gateway IP address). Specify a Subnet Mask for your LAN segment. Specify the default gateway for LAN segment. By selecting the DHCP server, the router will automatically give your LAN clients an IP address. If the DHCP server is not enabled then you'll have to manually set your LAN client's IP addresses; make sure the LAN Client is in the same subnet as this broadband router if you want the router to be your LAN client's default gateway. You can configure a particular IP address range for your DHCP server to assign IP addresses to your LAN Clients. Note: By default the IP range is from: Start IP 192.168.2.100 to End IP 192.168.2.200. If you want your PC to have a static/fixed IP address then you'll have to choose an IP address outside this IP address range. If 802.1d Spanning Tree function is enabled, this router will use the spanning tree protocol to prevent from network loop happened in the LAN ports. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
41
Parameters
Default
Description
IP address
192.168.2.1
This is the router’s LAN IP address (Your LAN
clients default gateway IP address).
Subnet Mask
255.255.255.0
Specify a Subnet Mask for your LAN segment.
Default Gateway
Specify the default gateway for LAN segment.
DHCP
Server
By selecting the DHCP server, the router will
automatically give your LAN clients an IP
address. If the DHCP server is not enabled then
you’ll have to manually set your LAN client’s IP
addresses; make sure the LAN Client is in the
same subnet as this broadband router if you
want the router to be your LAN client’s default
gateway.
DHCP Client Range
You can configure a particular IP address range
for your DHCP server to assign IP addresses to
your LAN Clients.
Note:
By default the IP range is from: Start IP
192.168.2.100
to End IP
192.168.2.200
. If you
want your PC to have a static/fixed IP address
then you’ll have to choose an IP address outside
this IP address range.
802.1d Spanning Tree
Disabled
If 802.1d Spanning Tree function is enabled, this
router will use the spanning tree protocol to
prevent from network loop happened in the LAN
ports.