Airlink AR675W User Manual - Page 42

Routing

Get Airlink AR675W PDF manuals and user guides
UPC - 658729081604
View all Airlink AR675W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Static DHCP Domain Name Specify the Static DHCP Addresses for your LAN clients. Enter the domain name of your LAN interface if there is one. Click at the bottom of the screen to save the above configurations. 3.1.3 Routing You can turn off the NAT function of your router by enabling the Static Routing and let the router forward packets by your routing policy. Parameter Enable Static Routing Destination LAN IP Subnet Mask Default Gateway Static Routes Delete Selected Description Enable/disable the NAT function Enter the IP Address of the destination LAN. Enter the Subnet Mask of the destination LAN. This is the gateway IP Address where packets are sent. Input the gateway IP Address. From the table, you can check each Static Routing setting. If you want to delete a setting, check the 'select' box of the setting you want to delete, then click 'Delete 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
42
Static DHCP
Specify the Static DHCP Addresses for your
LAN clients.
Domain Name
Enter the domain name of your LAN interface if
there is one.
Click <
Apply Changes
> at the bottom of the screen to save the above configurations.
3.1.3 Routing
You can turn off the NAT function of your router by enabling the Static Routing and let the router
forward packets by your routing policy.
Parameter
Description
Enable Static Routing
Enable/disable the NAT function
Destination LAN IP
Enter the IP Address of the destination LAN.
Subnet Mask
Enter the Subnet Mask of the destination LAN.
Default Gateway
This is the gateway IP Address where packets are sent.
Input the gateway IP Address.
Static Routes
From the table, you can check each Static Routing
setting.
Delete Selected
If you want to delete a setting, check the ‘select’ box of
the setting you want to delete, then click ‘Delete