Alpine CDA 9851 Owners Manual - Page 7
Getting Started - cd
UPC - 793276711199
View all Alpine CDA 9851 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started SOURCE/ POWER MUTE RESET Rotary encoder Opening and Closing the Movable Display Press c. The movable display will open. g MENU f c Turning Power On and Off Press SOURCE/POWER to turn on the unit. • The unit can be turned on by pressing any other button except eject c, TITLE. Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit. • The first time power is turned on, the volume will start from level 12. Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, after changing the car battery, etc. 1 Turn off the unit power. 2 Press RESET with a ball-point pen or similar pointed object. Setting Time 1 Press MENU to select SETUP. 2 Press g or f to select the CLOCK mode. 3 Turn the Rotary encoder to adjust the hours. 4 When the hour has been adjusted, press the Rotary encoder. 5 Turn the Rotary encoder to adjust the minutes. 6 When the minute has been adjusted, press the Rotary encoder. 7 When the setting has been completed, press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. • To synchronize the clock to another clock/watch or radio time announcement, press and hold the Rotary encoder for at least 2 seconds after setting the "hour." Minutes will reset to 00. If the display shows over "30" minutes when you do this, the time will advance one hour. • If no operation is performed in 60 seconds, the unit returns to normal mode. 6-EN To close the movable display, press c again. The movable display will close. • Do not apply shock to the movable display when it is open as it may result in malfunction of the unit. • The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses. • The display will stop at the set tilt angle when closing. Caution Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch. Display Tilt Adjustment The movable display may be adjusted to 3 different tilt angles depending upon user preference. 1 Press MENU to select the TILT mode. 2 Turn the Rotary encoder to adjust the tilt angle of the movable display. Movable display 3 Press MENU to select RETURN. The display returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. • The display will close a half minute after the ignition key is turned to the OFF position. • The adjusted tilt angle of the display is stored in memory. There is no need to re-adjust the tilt angle when the power is turned back on. Caution Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.