Alpine DVR-C320R Owners Manual - Page 18
Securing the rear camera
View all Alpine DVR-C320R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the product 2.2.2 Securing the rear camera Refer to the following instructions to secure the product to the installation location. 1 After determining the installation location, wipe the installation surface of the windshield with a dry cloth. Check the installation location before you secure the rear camera to the rear windshield. After securing the rear camera to the windshield, it is hard to remove the camera or change the installation location due to the strong adhesive. 2 ➊1 ➋2 Remove the protective film from the adhesive mount and camera lens. Before attaching the rear camera, check the position of the lens. The TOP label should be above the lens. 3 Attach the product with the Alpine logo facing inside the vehicle and press the adhesive tape firmly to secure the camera. If the product is installed in reverse, the rear view will be recorded upside down. 4 Adjust the camera's vertical angle. 18