Alpine DVR-C320R Owners Manual - Page 22
Using parking mode
View all Alpine DVR-C320R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Using recording features 3.5 Using parking mode When the product is connected to the vehicle via the hardwiring cable, the operating mode is switched to parking mode after the engine or electrical accessories are turned off and the voice guide will indicate that the parking mode has started. • Parking mode operates only when the hardwiring cable is connected. The hardwiring cable must be professionally installed to the vehicle by an Alpine authorized dealer/a trained specialist mechanic. • To use all recording modes, you must insert a memory card into the product. • Depending on the battery charging status of the vehicle, the duration of parking mode may differ. If you want to use parking mode for an extended period, check the battery level to prevent battery depletion. Refer to the following table to set the parking mode options. Option No motion or impact detected Motion Detection Motion detected Impact detected Time Lapse No impact detected Impact detected Energy Saving No impact detected Impact detected OFF Operation description Monitors movement in the area or impacts to the vehicle. Video will be recorded only when motion or an impact is detected. When a moving objects is detected while parking, a video is recorded for 20 seconds (from 10 seconds before detection to 10 seconds after detection) and stored in the "motion_timelapse_rec" folder. When an impact is detected while parking, a video is recorded for 20 seconds (from the moment 10 seconds before detection to 10 seconds after detection) and stored in the "parking_rec" folder. A videos is recorded at a rate of 2 fps for 10 minutes, compressed into a 2-minute long file, and stored in the "motion_timelapse_rec" folder. Since the video file recorded with this option is small, you can record a long video. When an impact is detected while parking, a video is recorded for 100 seconds at a rate of 2 fps (from the moment 50 seconds before detection to 50 seconds after detection) and stored in the "parking_rec" folder after being compressed into a 20-second long file. (The buzzer will sound.) Monitors impacts to the vehicle. Video will be recorded only when an impact is detected. When an impact is detected while parking, a video is recorded for 20 seconds (from within 1 second after detection) and stored in the "parking_rec" folder. The product is powered off when electric accessories and the engine are turned off. If parking mode settings are changed, the videos recorded with the previous settings will be deleted. To prevent data loss, back up all parking mode videos before changing parking mode settings. You cannot use Motion Detection, Time Lapse, or Energy Saving at the same time. 22