Alpine PSS-22WRA Owners Manual

Alpine PSS-22WRA Manual

Get Alpine PSS-22WRA PDF manuals and user guides View all Alpine PSS-22WRA manuals
Add to My Manuals
Save this manual to your list of manuals

Alpine PSS-22WRA manual content summary:

  • Alpine PSS-22WRA | Owners Manual - Page 1
    be sure to carefully read this installation manual and the separate user's manual so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals. • This manual includes a number of symbols
  • Alpine PSS-22WRA | Owners Manual - Page 2
    could lead to electric shock or injury. Use the accessories according to the instructions, and attach them securely. Failing to do so could lead to an The installation and wiring of this product requires specialized skills and experience. Have the product installed by an Alpine authorized
  • Alpine PSS-22WRA | Owners Manual - Page 3
    Tools Required Panel Removal Tool Wire Cutters Torx T15 T20 T30 T45 Heat Gun Jeep Wrangler UNLIMITED JK • 3/19 Sockets 7mm 10mm 18mm Extension #2 Phillips Screwdriver Ratchet Cordless Power Drill Cordless Impact Gun 9/32" Drill Bit
  • Alpine PSS-22WRA | Owners Manual - Page 4
    Jeep Wrangler UNLIMITED JK • 4/19 Subwoofer Enclosure Main Harness RCA Adapter Power Cable (3) 10-24 ¾" Hex Washer Head Screws (10) Cable Ties (4) Alpine Logo Badges (4) Tweeters (4) Tweeter Crossovers TW level +3db TW level 0db TW level +3db TW level 0db TW level +3db TW level 0db
  • Alpine PSS-22WRA | Owners Manual - Page 5
    Jeep Wrangler UNLIMITED JK • 5/19 Factory Equipment Removal Process 2011 - 2018 Models Radio 1 Remove the rubber cover from the top storage area and extract (1) 7mm screw. 2 Remove the knee cover panel and extract (2) 7mm screws located to the right and left sides of the steering wheel column.
  • Alpine PSS-22WRA | Owners Manual - Page 6
    Jeep Wrangler UNLIMITED JK • 6/19 Factory Equipment Removal Process 2011 - 2014 Models Tweeters 1 Remove the top dash tweeter using a panel removal tool. 2 Gently open the (3) lock tabs to release the factory tweeter. Factory Equipment Removal Process 2015 - 2018 Models Top Dash Speakers 1
  • Alpine PSS-22WRA | Owners Manual - Page 7
    Front Lower Dash Speaker Removal 1 Using a panel removing tools, remove the dash side covers by each door. Jeep Wrangler UNLIMITED JK • 7/19 2 Remove the driver side knee cover by releasing the (2) top clips. Driver Side Passenger Side 3 Extract (2) 10mm screws from the metal steering wheel
  • Alpine PSS-22WRA | Owners Manual - Page 8
    Jeep Wrangler UNLIMITED JK • 8/19 Front Lower Dash Speaker Removal (continued) '07-11 Models have (2) additional screws 7 Extract (2) 7mm screws from the side of each respective dash enclosure. 8 Remove (1) 10mm screws from under the each enclosure. Driver Side Passenger Side 9 Disconnect
  • Alpine PSS-22WRA | Owners Manual - Page 9
    Sound Bar Speaker Removal 2011 - 2014 1. Remove (3) T15 Torx screws from the speaker grills. Jeep Wrangler UNLIMITED JK • 9/19 2. Disconnect and remove the factory speaker. Sound Bar Speaker Removal 2015 - 2018 1. Remove (3) T20 Torx screws from the speaker grill. 2. Remove (5) T20 Torx screws
  • Alpine PSS-22WRA | Owners Manual - Page 10
    2 Use a 10mm socket to connect the power cable to the POSITIVE (+) battery terminal. Note: The NEGATIVE terminal should remain disconnected until the installation is completed. 3 Route the power cable following the OEM harness and secure it with the cable ties provided as shown below. 4 Route the
  • Alpine PSS-22WRA | Owners Manual - Page 11
    Amplifier Installation (continued) 7 Route the In/Out audio connections behind the dash frame to the radio location. Make all the necessary connections based on your system configuration
  • Alpine PSS-22WRA | Owners Manual - Page 12
    . Jeep Wrangler UNLIMITED JK • 12/19 14 Connect both amplifiers Note: Be sure to insert the corresponding connector into each amplifier. + ++ Subwoofer Installation 1 Using a T30 Torx, remove the OEM harness mounting plate as shown below. Use a panel removing tool to remove the two plugs from
  • Alpine PSS-22WRA | Owners Manual - Page 13
    UNLIMITED JK • 13/19 Front Speaker (Tweeters) Installation 2011 - 2014 Models 1 Select the (2011-2014) crossover input wires and connect to the vehicle plug. Connect tweeter connectors. Secure the crossover. Note: 2015-2017 input plug is not used. 2 Guide the tweeter in the opening and press
  • Alpine PSS-22WRA | Owners Manual - Page 14
    a slit in the center of the polyfill, and pull the vehicle plug through. then insert the excess polyfill into the sound bar enclosure. Note: Installation of polyfill is needed for optimum sound. Insert Polyfill 6 Select the (2011-2014) crossover input wires and connect to the vehicle plug. Connect
  • Alpine PSS-22WRA | Owners Manual - Page 15
    Jeep Wrangler UNLIMITED JK • 15/19 Rear Sound Bar Speaker Installation 2011 - 2014 Models (continued) 7 Clean the factory grille surface and apply the Alpine Badges. 8 Align the factory speaker grille over the tweeter bridge grille adapter tabs, connect the vehicle plug to the speaker and mount
  • Alpine PSS-22WRA | Owners Manual - Page 16
    PSS-22WRA WIRING DIAGRAM FOR FACTORY HEADUNIT To Vehicle Connectors Power/Speaker 16-pin Gray Connector To OEM Headunit OEM T-HARNESS ADAPTER Front Speakers 4 PIN WHITE CONNECTOR Rear 4 PIN BLACK CONNECTOR High Level Out Front Rear Subwoofer Front Rear Subwoofer Blue Amp Turn-on
  • Alpine PSS-22WRA | Owners Manual - Page 17
    Front Rear Subwoofer Blue/White Amp Turn-on SBV-10-WRA iDatalink MAESTRO Module Blue Amp Turn-On Subwoofer Level Remote Subwoofer BLACK To Chassis Ground For a detailed Alpine Restyle headunit wiring diagram refer to it's corresponding installation manual. RED To Battery Cable KTA
  • Alpine PSS-22WRA | Owners Manual - Page 18
    PSS-22WRA WIRING DIAGRAM FOR AFTER MARKET HEADUNIT Jeep Wrangler UNLIMITED JK • PIN BLACK CONNECTOR Front Rear Subwoofer High Level Out NOT USED Blue/White Amp Turn-On L R L R L R Connect to Alpine Restyle headunit low level output Front Rear Subwoofer WHITE/GRAY RCA Adapter GREEN/PURPLE
  • Alpine PSS-22WRA | Owners Manual - Page 19
    Troubleshooting Guide Jeep Wrangler UNLIMITED JK • 19/19 Symptom Possible Cause Missing or and re-connect after 6 Airbag light is on Failed to disconnect the battery while 5 minutes. If problem is not solved, the working on the vehicle. vehicle will have to be taken to a Jeep dealer
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
Jeep Wrangler
UNLIMITED JK
• 1/19
Jeep Wrangler
PSS-22WRA Sound System
Installation Manual
• Model: 4-Door Wrangler Unlimited JK
• Model Year: 2011 – 2018
*Not compatible with factory amplified systems
**Not compatible with manual transmission models
Model
Year
Jeep
Wrangler Unlimited
2011 – 2018
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is not guaranteed if
the manufacturer has made production changes to the listed vehicles above.
Introduction
•
Congratulations on purchasing the PSS-22WRA. This installation manual is designed to take you through the
step-by-step installation of the PSS-22WRA into a 2011 - 2018 Jeep Wrangler Unlimited. Please familiarize
yourself with the owner’s manual and if you still have additional questions please call 1-800-TECH-101.
To Ensure Safe Use Always Follow These Precautions
• The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
• Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
• This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly
may lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly
may lead to injury or property damage.
Warning: Before you begin, remove the ground wire from the NEGATIVE (-) terminal of
the battery. Failing to do so can lead to electric shock, injury or damage to equipment.
Note
•
Design and specifications are subject to change without notice for improvement.