Alpine PSS-22WRA Owners Manual - Page 10
Amplifier Installation
View all Alpine PSS-22WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Amplifier Installation 1 Lift the engine cover and pull towards the front of the vehicle to remove it. Jeep Jeep Wrangler UNLIMITED JK • 10/19 2 Use a 10mm socket to connect the power cable to the POSITIVE (+) battery terminal. Note: The NEGATIVE terminal should remain disconnected until the installation is completed. 3 Route the power cable following the OEM harness and secure it with the cable ties provided as shown below. 4 Route the power cable through the blank grommet on the firewall on the drivers side. 5 Use the supplied cable ties to secure the main harness to the dashboard frame with the inductors between the vehicle's body and dash board frame. 6 Route the amplifier main harness up to the cluster area following the OEM harness. (Shown in dashed line) 7JFXGSPNESJWFSTJEF CFUXFFOUIFCPEZ BOEEBTICPBSEGSBNF