Alpine PSS-22WRA Owners Manual - Page 14
Rear Sound Bar Speaker Installation 2011 - 2014 Models
View all Alpine PSS-22WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Jeep Wrangler UNLIMITED JK • 14/19 Rear Sound Bar Speaker Installation 2011 - 2014 Models 1 Press the tweeter into the tweeter bridge grille adapter. Observe the tab orientation. 2 Route the tweeter wires through the grille by removing the wire cover. Ensure the wires do not get pinched when reinstalling the wire cover. 3 Route the wire through the notch on the basket, then press the grille into place. Ensure the wires do not get pinched. 4 Add foam strip on top of wires in channel. 5 Cut a slit in the center of the polyfill, and pull the vehicle plug through. then insert the excess polyfill into the sound bar enclosure. Note: Installation of polyfill is needed for optimum sound. Insert Polyfill 6 Select the (2011-2014) crossover input wires and connect to the vehicle plug. Connect tweeter connectors. Secure the crossover. Note: 2015-2017 input plug is not used. TW level +3db TW level 0db (-) (+) (+) Do not use (2015-2017) 2007-2014 Connect the tweeter (-) to the crossover and select either: 0db wire +3db wire (Increased TW level) for the tweeter (+) lead