Apple MB792Z/A User Manual - Page 393

• To cut selected regions that fall between the locators: Choose Region > Cut/Insert Time > Snip: Cut Section Between Locators (or use the corresponding key command). Any regions that span the cycle area (for example, a 16-bar long region that starts at bar 1 and ends at the start of bar 17) are cut. The section between the locators (bars 5 to 8) is deleted from all selected regions. (In fact, it is copied to the Clipboard and removed from the arrangement.) All regions to the right of the right locator are moved to the left by the length of the cycle (4 bars). This includes newly created regions that result from the operation. In the case of the 16-bar region example, from above, it is cut into two regions: • One spans bars 1 to 4. • The other is now an 8-bar long region that is placed from bar 5 to the start of bar 13. Tip: The Snip command is ideal for situations in which you want to remove an entire section of your arrangement, such as a chorus. To insert a cut section into your arrangement 1 Set the locators to span the section you want to remove (bars 5 to 8, for example). 2 Do one of the following: • To cut all regions that fall between the locators: Click the Cut Section button in the Arrange toolbar, or use the Region > Cut/Insert Time > Snip: Cut Section Between Locators (or use the corresponding key command). • To cut selected regions that fall between the locators: Choose Region > Cut/Insert Time > Snip: Cut Section Between Locators (or use the corresponding key command). 3 Set the playhead to the position where you want to insert the cut section. 4 Either click the Insert Section button in the Arrange toolbar (to affect all tracks, regardless of selection), or choose Region > Cut/Insert Time > Splice: Insert Snipped Section at Playhead. Chapter 13 Creating Your Arrangement 393