Asko D5644 User manual 8094451 Asko D5644 XLCS EN - Page 10

NOTE! During the first run of each program, the remaining time displayed can be slightly misleading, as the dishwasher is estimating the time. When you run the program a second time, the dishwasher will calculate the remaining time based on the previous duration of the program. STOPPING OR CHANGING A PROGRAM If you want to change programs after starting the dishwasher, open the door then press and hold Start/Stop for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then choose a new program, press Start/Stop, and close the door. DO YOU WANT TO ADD MORE DISHES? Open the door. The dishwasher stops automatically. Add the dishes, close the door, and the dishwasher resumes the program. IF THE DISHWASHER IS TURNED OFF USING THE ON/LEFT-ON MODE BUTTON OR DUE TO A POWER FAILURE If the program was not finished, the interrupted program resumes when power is restored. NOTE! During drying, the program is interrupted if the power is cut or the door is open for more than 2 minutes. ONCE THE PROGRAM HAS FINISHED Once the program has finished, "End" appears on the display. A buzzer also sounds at the end of the program. See the section Settings, which describes how to change this function. Once the dishwasher has finished, it uses only standby power. Turn off the water supply valve after each use. Customer Care Center 1-800-898-1879 10 www.askousa.com