Asko D5644 User manual 8094451 Asko D5644 XLCS EN - Page 14

2 Remove any debris using a needle, toothpick, or some other similar pointed device. The spray arms also have holes underneath. DOOR When cleaning the edge around the door, use only a slightly damp cloth (with a little cleaner if necessary). WARNING! Do not use a spray bottle or the like around the door lock. This is to ensure that water does not penetrate the door catch and come into contact with the electrical components. UPPER SPRAY ARM 1 Pull out the basket. 2 Unscrew the spray arm bearings as illustrated to remove the spray arm from the upper basket. Spray arm bearings 3 Clean the upper spray arm in the same manner as the lower spray arm. 4 Replace the spray arm and screw the spray arm bearings firmly back into place. LIMESCALE DEPOSITS The dishwasher tub is made of stainless steel and is kept clean through normal use. However, if you have hard water, limescale deposits may form in the dishwasher. If this happens, run the Heavy wash program with high temperature and two tablespoons of citric acid or commercially available dishwasher cleaner in the detergent compartment (with no dishes in the machine). FRONT PANEL Keep the touch buttons clean and free from grease. Wipe them clean with a dry or slightly damp cloth. Never use cleaners - they can scratch the surface. Use the On/Left-on mode button to turn off the dishwasher before cleaning the touch buttons to avoid activating any buttons unintentionally. Customer Care Center 1-800-898-1879 14 www.askousa.com