Asko T701 User manual Use & Care Guide Asko T701,721,761,781 - Page 15

ENGLIESNHGLISH PROGRAMMING INSTRUCTIONS Below are the basic instructions for changing a preset program. The following paragraphs explain the programming menus and options and how to navigate through them. 1. Press the button for the preset program you want to change (P1-P4). The program you select will display in the lower left corner of the LCD window. 2. Press MENU until the one you want to change displays (e.g., Programs, Temperature, etc.). 3. Press to scroll through the available options or to toggle between off and on. 5. Press ENTER to save you settings and return to the Main Program screen. The LCD will display your new settings. 6. Press ENTER again to permanently save your settings. (Otherwise, the machine will revert back to the previous settings when the program ends. NAVIGATING THE MENUS The following paragraphs explain how to navigate through the menus and change the preset programs. If you don't want to make changes in all of the menus, continue to press MENU until the one you do want to change displays. To restore a preset program to its original settings, simply press the button for the preset program (P1-P4) you want to restore and hold it down while you press ENTER. The program will revert to its original settings. We recommend that you make two or three trial changes to understand how easy it is to customize these program. If you change your mind in the process of changing a program, press the Power button to switch the washer off. When you switch the power back on, the program will be as originally set. Remember, the first step to customizing a preset program is to press the button for the program you want to customize (P1-P4). The Program Menu The Program menu lets you set the dry program you prefer. You would also use this menu to set the machine for a Timed Dry or Air Fluff program. (See "Timed Dry and Air Fluff" on page 16.) 1. Press MENU until "Select Program" displays. Timed Dry and Air Fluff When you select Timed Dry or Air Fluff on the program menu, the word "Time" and a number (of minutes) will flash in the upper right corner of the LCD window. This indicates you must select a program time (5 to 90 minutes in 5-minute increments). 1. Press MENU until "Select time" displays. 2. To change the number, simply press an Arrow button until the length of time you want the program to run displays. 3. Press ENTER to program your change. 4. Press ENTER again to permanently save your program setting. When you press START, the time remaining for the program to run displays in the bottom right-hand corner of the LCD window, as illustrated below: The remaining time toggles between the minutes 2. Press to scroll through the program choices (Extra Dry, Dry, Normal, etc.) 3. When your preference displays, press ENTER. The LCD will display the new program setting. 4. Press ENTER again to permanently save your program setting. remaining (e.g., 23) and the hour(s) remaining (e.g., 1h). Page 15