Asko T701 User manual Use & Care Guide Asko T701,721,761,781 - Page 19

ENGLIESNHGLISH CLEANING THE FAN The fan should be cleaned at least once a year. If you have pets, you should clean it more often. To clean the fan, follow the steps below: 1. Turn off the main power to the machine. 2. Remove the two 20 torx screws on the bottom of the front panel then grasp the bottom of the panel and pull it forward and down. 3. Unscrew the 10 torx safety screw on the bottom of the fan cover and fold out the four tabs. 4. Remove the fan cover. 5. Hold the fan in place while you unscrew the nut. 6. Pull out the fan and clean it with a brush and water. 7. Replace the fan and screw the nut securely. 8. Replace the fan cover and fold the lugs back into place. Replace the safety screw. 9. Replace the front panel. CLEANING THE CONDENSER The condenser should be cleaned on a regular basis, preferably monthly. If you have pets, you should probably clean it more often. To clean the condenser, follow the steps below: 1. Turn off the main power to the machine. 2. Remove the two 20 torx screws on the bottom of the front panel then grasp the bottom of the panel and pull it forward and down. 3. Turn the levers on the condenser cover counterclockwise to release it then pull it down. 4. Pull out the condenser. 5. Spray the filter with warm water until all of the lint is removed. WARNING! Do not put the condenser into a dishwasher. Do not use any sharp metal objects or a wire brush to clean the condenser. Also, do not poke anything between the fins. 6. Make sure the side marked "UP" does face up and carefully replace the condenser into the unit. 7. Close the condenser cover. 8. Replace the front panel. 9. Turn back on the main power. Page 19