Asko W6424 User manual 80 888 69 Asko W6424 EN - Page 20

Operating instructions 7Close the washer door and press the Start/Stop button Time remaining The time remaining is shown in hours and minutes. Once a program is selected, the estimated program time is displayed. This may differ from time to time depending on the temperature of the water entering the machine and the size of the load. If the program time is longer than the previous wash with the same program, "0:01" will be displayed until the program finishes. This is normal! The next time you use the program under similar conditions, the estimated program time will be more accurate. To add or remove laundry after the program starts If you want to add or remove items after the program has started, you can stop the program by pressing and holding the Door Opening button (key symbol) for three seconds. The program time flashes on the display. When you restart the machine, add any extra detergent needed and close the washer door. The machine continues automatically from the point where the program was interrupted. Stopping or changing a program You can stop a program by pressing the Start/Stop button for three seconds. To restart the machine, select a new program, add any extra detergent needed, and press the Start/Stop button. Note! Do not open the detergent compartment while the machine is running. 8Once the program has finished Once the program has finished, "End" appears on the display. The washer door opens automatically once the program has finished. If you want to deactivate the Automatic Door Opening function, see the "Selecting settings" section. • Remove the laundry. • Turn off the main power switch as this will save energy. If you have small children or pets at home, close the washer door once you have removed the laundry. Backlighting Two minutes after the wash program finishes the display backlighting enters energy saving mode. 20 Customer Care Center 1-800-898-1879 www.askousa.com