Asko W6424 User manual 80 888 69 Asko W6424 EN - Page 24

Rinse holes under the paddle, If you have hard water

Page 24 highlights

Care and maintenance instructions Rinse holes under the paddle If you suspect that objects such as nails or paper clips may have fallen into the wash drum, you should check the space under the paddles. Such objects can rust and cause spots on clothing. Nails and other sharp objects can cause holes in fabrics. Do as follows: 1. Insert a screwdriver or similar tool into the hole on the paddle as illustrated and carefully push to the left. If you have hard water If you live in an area with hard water (high limescale content), a grayish-white coating may form on the wash drum. To remove this, empty a sachet of citric acid, approx. 20gram (1ounce), into the wash drum and run any 203°F (95°C) program. Repeat if necessary. 2. Use your other hand to grasp the paddle and pull it toward you. 3. Lift the paddle. 4. Remove any objects. 5. Place the paddle in the mounting hole with the F-mark toward you. Ensure that all the paddle fasteners are in their holes in the drum. Push it in until it catches. 24 Customer Care Center 1-800-898-1879 www.askousa.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Rinse holes under the paddle
If you suspect that objects such as nails or paper
clips may have fallen into the wash drum, you
should check the space under the paddles. Such
objects can rust and cause spots on clothing.
Nails and other sharp objects can cause holes in
fabrics.
Do as follows:
1. Insert a screwdriver or similar tool into the hole
on the paddle as illustrated and carefully push
to the left.
2. Use your other hand to grasp the paddle and
pull it toward you.
3. Lift the paddle.
4. Remove any objects.
5. Place the paddle in the mounting hole with the
F-mark toward you. Ensure that all the paddle
fasteners are in their holes in the drum. Push
it in until it catches.
If you have hard water
If you live in an area with hard water (high
limescale content), a grayish-white coating may
form on the wash drum. To remove this, empty a
sachet of citric acid, approx. 20gram (1ounce),
into the wash drum and run any 203°F (95°C)
program. Repeat if necessary.
Customer Care Center
24
1-800-898-1879
www.askousa.com
Care and maintenance instructions