Asko W6984 User manual 80 888 83 Asko W6984 EN - Page 22

Operating instructions 7Close the washer door and press the Start/Stop button Time remaining When the program starts, an estimated program time, in hours and minutes, is displayed. The remaining time is updated three times during the program, based on the actual load and the incoming water temperature. The first update takes place after about 15 minutes. The remaining time is last updated just before the final rinse. To add or remove laundry after the program starts If you want to add or remove items after the program has started, you can stop the program by pressing and holding the Door Opening button (key symbol) for three seconds. When you restart the machine, add any extra detergent needed and close the washer door. The machine continues automatically from the point where the program was interrupted. Stopping or changing a program You can stop a program by pressing the Start/Stop button for three seconds. "Stop" appears on the display. To restart the machine, select a new program, add any extra detergent needed, and press the Start/Stop button. NOTE! Do not open the detergent compartment while the machine is running. 8Once the program has finished Once a program has finished, "End" appears on the display. The washer door opens automatically once the program has finished. If you want to deactivate the Automatic Door Opening function, see the "Selecting settings" section. • Remove the laundry. • Turn off the main power switch as this will save energy. If you have small children or pets at home, close the washer door once you have removed the laundry. Backlighting Two minutes after the wash program finishes the display backlighting enters energy saving mode. 22 Customer Care Center 1-800-898-1879 www.askousa.com