Asko W6984 User manual 80 888 83 Asko W6984 EN - Page 35
Built-in installation, If the washer is installed in a closet the door must
View all Asko W6984 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installation Built-in installation ASKO washers can be installed beneath a cabinet or worktop with a height of 34" to 35" (863 to 889 mm) or in a closet. There must be a gap of about ½" (12 mm) all around the machine, including between the rear edge of the machine's top panel and the back wall. The opening width must be at least 24½" (622 mm). Space must also be available for the fill and drain hoses. See the illustration below for measurements and positions. If the washer is installed in a closet the door must be left open while the washer is running. If the drain outlet is higher than 24"(610 mm), the connections will need to be recessed. Customer Care Center 35 1-800-898-1879 www.askousa.com
Built-in installation
ASKO washers can be installed beneath a cabinet
or worktop with a height of 34" to 35" (863 to 889
mm) or in a closet. There must be a gap of about
½" (12 mm) all around the machine, including
between the rear edge of the machine's top panel
and the back wall. The opening width must be at
least 24½" (622 mm). Space must also be
available for the fill and drain hoses. See the
illustration below for measurements and positions.
If the washer is installed in a closet the door must
be left open while the washer is running.
If the drain outlet is higher than 24"(610 mm), the
connections will need to be recessed.
35
Customer Care Center
1-800-898-1879
www.askousa.com
Installation