Asus A8V-E SE A8V-E SE User's Manual for English Edition - Page 67

PEG Data Scrambling [Auto] Disables or enables the PCI Express™ graphics data scrambling. Configuration options: [Auto] [Disable] [Enable] PE0-PE3 Data Scrambling [Enable] Disables or enables the PCI Express™ 0 to PCI Express™ 3 data scrambling. Configuration options: [Disable] [Enable] Init Display First [PCI Slot] Allows you to select the graphics controller to use as the primary boot device. Configuration options: [PCI Slot] [PCIEx] Chipset Vcore Adjustment [+1.5 V] Sets the chipset vcore adjustment voltage. Configuration options: [+1.5 V] [+1.6 V] 2.4.6 PCI PnP Advanced Phoenix-Award BIOS CMOS Setup Utility Frequency/Voltage control Plug & Play O/S [No] Resources Controlled By x IRQ Resources Assign IRQ for VGA [Auto] [Enabled] ** PCI Express relative items ** Maximum Payload Size [4096] Select Menu Item Specific Help Select Yes if you are using a Plug and Play capable operating system. Select No if you need the BIOS to configure non-boot devices. Plug & Play O/S [No] When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes] Resources Controlled By [Auto] When set to [Auto], the BIOS automatically configures all the boot and Plug and Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and memory base address fields. Configuration options: [Auto] [Manual] When the item Resources Controlled By is set to [Auto], the item IRQ Resources is grayed out and not user-configurable. Refer to the section "IRQ Resources" for information on how to enable this item. ASUS A8V-E SE 2-25