Asus A8V-E SE A8V-E SE User's Manual for English Edition - Page 74

2.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options. Phoenix-Award BIOS CMOS Setup Utility Power Hardware Monitor M/B Temperature Current CPU1 Temperature Chassis Fan speed CPU Fan speed Power Fan speed VCORE Voltage +12V Voltage +3.3V Voltage +5VCC Voltage Q-FAN Function x CPU Target Temperature x Temperature Tolerance x Minimum FAN Duty Cycle x FAN Step Time 34ºC/ 93ºF 47ºC/118ºF 0 RPM 4265 RPM 7500 RPM [ 1.64V] [ 11.35V] [ 3.36V] [ 5.22V] [Disabled] 45ºC/113ºF 3ºC 11/16 0.1 sec Select Menu Item Specific Help F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10: Save and Exit M/B Temperature Current CPU Temperature The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. These items are not user-configurable. Chassis Fan Speed CPU Fan Speed Power Fan Speed The onboard hardware monitor automatically detects and displays the Chassis, CPU, and Power fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows 0. These items are not user-configurable. VCORE Voltage, +12V Voltage, 3.3V Voltage, 5VCC Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. These items are not user-configurable. Q-FAN Function [Disabled] Allows you to disable or enable the ASUS Q-Fan function. Configuration options: [Disabled] [Enabled] 2-32 Chapter 2: BIOS setup