Asus DSL-N10S_B DSL-N10SB Manual for the English - Page 22
Interface Setup > Internet, Connect on Demand
View all Asus DSL-N10S_B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
To configure the Internet settings: 1. Click Interface Setup > Internet tab. 2. In the AMT VC dropdown list, select the virtual circuit, and key in the virtual path values for the asynchronous transfer mode ranging from 0 to 255 in the VPI field, and the VCI values ranging from 1 to 65535. 3. In the IPv4/IPv6 field, select IPv4, IPv4/IPv6 or IPv6. 4. In the Encapsulation item, select Dynamic IP Address, Static IP address, PPPoA/PPPoE or Bridge Mode. To configure the PPP settings: 1. In the User Name and Password fields, key in the user name and password provided by your ISP. 2. In the Connection Settings list, you can select Always On (Recommended), Connect on Demand, or Connect Manually. If you select Connect on Demand type, key in the time of inactivity (in minutes) when the Internet connection is automatically disconnected. 3. Click SAVE to apply the settings made. 22 DSL-N10S Chapter 4: Configuring via the web GUI