Asus DSL-N10S_B DSL-N10SB Manual for the English - Page 31
Configuring the UPnP settings
View all Asus DSL-N10S_B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Configure the SNMP settings This page allows you to configure the SNMP (Simple Network Management Protocol) settings. To configure the SNMP settings: 1. Click Access Management > SNMP tab. 2. Tick Activated to enable SNMP. 3. Key in the trap host. 4. Click Save when done. Configuring the UPnP settings The UPnP (Universal Plug and Play) Configuration page allows you to access the media of the UPnP devices found in your network. To configure the UPnP settings: 1. Click Access Management > UPnP tab. 2. In the UPnP field, tick Activated to enable UPnP connection. 3. In the Auto-configured field, tick Activated to enable auto-configuration. 4. Click Save to save the settings. Chapter 4: Configuring via the web GUI DSL-N10S 31
31
Chapter 4: Configuring via the web GUI
DSL-N10S
Configure the SNMP settings
This page allows you to configure the SNMP (Simple Network Management
Protocol) settings.
To configure the SNMP settings:
1.
Click
Access Management > SNMP
tab.
2.
Tick
Activated
to enable SNMP.
3.
Key in the trap host.
4.
Click
Save
when done.
Configuring the UPnP settings
The UPnP (Universal Plug and Play) Configuration page allows you to access the
media of the UPnP devices found in your network.
To configure the UPnP settings:
1.
Click
Access Management
>
UPnP
tab.
2.
In the
UPnP
field, tick
Activated
to enable UPnP connection.
3.
In the
Auto-configured
field, tick
Activated
to enable auto-configuration.
4.
Click
Save
to save the settings.