Asus F1A75-V PRO User Manual - Page 47
Internal connectors, SATA Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_E1, SATA6G_1~6 - a75
View all Asus F1A75-V PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2.8.3 Internal connectors 1. SATA Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1, SATA6G_1~6) These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 10, or JBOD configuration through the onboard AMD® A75 FCH controller. Chapter 2 • These connectors are set to IDE mode by default. In IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA RAID set using these connectors, set the type of the SATA connectors to [RAID] in the BIOS. See section 3.4.2 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows ® XP SP3 or later version. • When using hot-plug and NCQ, set the type of the SATA connectors to [AHCI] in the BIOS. See section 3.4.2 SATA Configuration for details. ASUS F1A75-V PRO 2-27