Asus K8V SE DELUXE K8 series Quick Setup Guide - Page 6
Connect drive signal cables - sata drive
 |
View all Asus K8V SE DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English 5 Connect drive signal cables 1. Connect the floppy disk signal cable. Make sure the side of the cable with the colored stripe is plugged into pin 1 of the floppy disk connector. 2. If you are using IDE hard disk drives, connect the IDE signal cable. Make sure the side of the cable with the colored stripe is plugged into pin 1 of the IDE connector. 3. If you're using SATA hard disk drives, connect the SATA signal cable. The SATA connector fits only in one orientation. If the connector doesn't fit, try reversing it. Floppy disk IDE Serial ATA 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
English
6
5
Connect drive signal cables
1.
Connect the floppy disk signal cable. Make sure the side of the
cable with the colored stripe is plugged into pin 1 of the floppy
disk connector.
2.
If you are using IDE hard disk drives, connect the IDE signal
cable. Make sure the side of the cable with the colored stripe is
plugged into pin 1 of the IDE connector.
3.
If you’re using SATA hard disk drives, connect the SATA signal
cable. The SATA connector fits only in one orientation. If the
connector doesn’t fit, try reversing it.
Floppy disk
Serial ATA
IDE