Asus M5A99FX PRO R20 M5A99FX PRO R2.0 User's Manual - Page 43
ASMedia, Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_E12 [navy blue], ASUS M5A99FX PRO R2.0 - bios settings
View all Asus M5A99FX PRO R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. ASMedia® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E12 [navy blue]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. • The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is not supported. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. • When using NCQ, set the ASM1061 Storage Controller item in the BIOS to [Enabled]. Refer to section 3.5.6 Onboard Devices Configuration for details. Chapter 1 ASUS M5A99FX PRO R2.0 1-29
ASUS M5A99FX PRO R2.0
1-29
Chapter 1
2.
ASMedia
®
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E12 [navy blue])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
•
The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is
not supported.
•
You must install Windows
®
XP Service Pack 3 or later versions before using Serial ATA
hard disk drives.
•
When using NCQ, set the ASM1061 Storage Controller item in the BIOS to [Enabled].
Refer to section
3.5.6 Onboard Devices Configuration
for details.