Asus M5A99FX PRO R20 M5A99FX PRO R2.0 User's Manual - Page 92
S.M.A.R.T Status Check [Enabled], SATA ESP on PORT1 [Disabled] - drivers
View all Asus M5A99FX PRO R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
• When the SATA Port1-Port 4 and the SATA Port5-eSATA items are set to [AHCI], the information of the SATA connectors 1-5 & eSATA can be seen only under the OS environment or during POST. • For Windows® XP OS, you have to install the AHCI driver, so that you could use the SATA connectors 1-5 & eSATA in AHCI mode under the OS environment. If you use a SATA optical drive to run the Windows OS installation disk, we strongly recommend that you install the optical drive to the SATA connector 5 & eSATA and set them to [IDE] mode. S.M.A.R.T Status Check [Enabled] [Enabled] Enables the S.M.A.R.T feature. [Disabled] Disables the S.M.A.R.T feature. SATA ESP on PORT1 [Disabled] Configuration options: [Enabled] [Disabled] SATA ESP on PORT2 [Disabled] Configuration options: [Enabled] [Disabled] SATA ESP on PORT3 [Disabled] Configuration options: [Enabled] [Disabled] SATA ESP on PORT4 [Disabled] Configuration options: [Enabled] [Disabled] SATA ESP on PORT5 [Disabled] Configuration options: [Enabled] [Disabled] SATA ESP on eSATA [Disabled] Configuration options: [Enabled] [Disabled] Chapter 3 3-20 Chapter 3: BIOS setup