Asus P4V800-X P4V800-X User Manual - Page 52

NorthBridge VIA P4X400/PT800 Configuration ******** DRAM Timing ******** Configure SDRAM Timing by SPD SDRAM Frequency SDRAM Burst Length SDRAM Command Rate Primary Graphics Adapter V-Link 8X Supported AGP Mode Graphics Aperture Size [Enabled] [Auto] [4QW] [2T] [AGP] [Enabled] Auto [64MB] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Configure DRAM Timing by SPD [Enabled] When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. Configuration options: [Disabled] [Enabled] The following sub-items appear when the item Configure DRAM Timing by SPD is set to Disabled. SDRAM Frequency [Auto] Allows you to set the SDRAM operating frequency. Configuration options: [200Mhz] [266Mhz] [333Mhz] [400Mhz] [Auto] DRAM CAS# Latency [2.5] This item controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [1.5T] [2.0T] [2.5T] [3.0T] SDRAM Bank Interleave [Disabled] This item controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [Disabled] [2-Way] [4-Way] SDRAM Burst Length [4QW] Configuration options: [8QW] [4QW] SDRAM Command Rate [2T] Configuration options: [2T] [1T] Primary Graphics Adapter [AGP] Configuration options: [PCI] [AGP] 2-18 Chapter 2: BIOS information