Asus P5B SE User Manual - Page 45

Audio 2, 4, or 6-channel configuration - p5b setting up raid

Get Asus P5B SE - Motherboard - ATX PDF manuals and user guides
UPC - 610839154968
View all Asus P5B SE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Audio 2, 4, or 6-channel configuration Port Light Blue Lime Pink Headset 2-channel Line In Headphone/Front Mic In 4-channel Surround Front Speaker Out Mic In 6-channel Surround Front Speaker Out Center/Subwoofer 9. External SATA port. This port connects to an external a Serial ATA hard disk drive. To configure a RAID0, RAID1, or JBOD set, install an external Serial ATA hard disk drive and an internal Serial hard disk drive connected to the onboard Serial ATA connector labeled SATA_E1. The external SATA port supports external SATA 3 Gb/s devices. Longer cables support higher power requirements to deliver signal up to two meters away, and enables improved hot-swap function. • Before creating a RAID set using Serial ATA hard disks, make sure that you have connected the Serial ATA signal cables and installed Serial ATA hard disk drives; otherwise, you cannot enter the JMicron RAID utility and SATA BIOS setup during POST. • If you intend to create a RAID configuration using this connector, enable the JMB363 RAID Controller item in the BIOS, and set the JMB363 Mode Select item to [RAID]. See section "4.3.5 IDE Configuration" for details. • DO NOT insert a different connector to this port. • DO NOT unplug the external Serial ATA box when a RAID 0 or JBOD is configured. 10. Serial Port. This 9-pin COM1 port is for pointing devices or other serial devices. 11. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. ASUS P5B SE 2-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
ASUS P5B SE
2-25
Audio 2, 4, or 6-channel configuration
9.
External SATA port
. This port connects to an external a Serial ATA hard disk
drive. To configure a RAID0, RAID1, or JBOD set, install an external Serial
ATA hard disk drive and an internal Serial hard disk drive connected to the
onboard Serial ATA connector labeled SATA_E1.
•
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cables and installed Serial ATA hard
disk drives; otherwise, you cannot enter the JMicron RAID utility and SATA
BIOS setup during POST.
•
If you intend to create a RAID configuration using this connector, enable
the
JMB363 RAID Controller
item in the BIOS, and set the
JMB363 Mode
Select
item to
[RAID]
. See section “
4.3.5 IDE Configuration
” for details.
The external SATA port supports
external SATA 3 Gb/s devices.
Longer cables support higher
power requirements to deliver
signal up to two meters away,
and enables improved hot-swap
function.
Port
Headset
2-channel
4-channel
6-channel
Light Blue
Line In
Surround
Surround
Lime
Headphone/Front
Front Speaker Out
Front Speaker Out
Pink
Mic In
Mic In
Center/Subwoofer
10.
Serial Port.
This 9-pin COM1 port is for pointing devices or other serial
devices.
11.
PS/2 keyboard port (purple)
. This port is for a PS/2 keyboard.
•
DO NOT insert a different connector to this port.
•
DO NOT unplug the external Serial ATA box when a RAID 0 or JBOD is
configured.