Asus P5B-VM DO Motherboard Installation Guide - Page 72

進階選單(Advanced menu) - manual

Page 72 highlights

2.4 Advanced menu) Main Advanced Power Jumperfree Configuration USB Configuration TPM Configuration BIOS SETUP UTILITY Boot Tools Exit CPU Configuration Chipset Onboard Devices Configuration PCIPnP Adjust system Frequency/Voltage,etc. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2006, American Megatrends, Inc. 2.4.1 JumperFree 設定(JumperFree Configuration) Advanced BIOS SETUP UTILITY Configure System Frequency/Voltage AI Tuning [Standard] DRAM Frequency [Auto] Select the target CPU frequency, and the relevant parameters will be auto-adjusted. Frequencies higher than CPU manufacturer recommends are not guaranteed to be stable. If the system becomes unstable, return to the default. AI Tuning [Standard] Manual] [Standard]。 AI Tuning Manual CPU Frequency [xxx] 0 PCI CPU Speed BIOS 100 至 400 MHz。 2-18 BIOS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

²-1·
第二章:BIOS 程式設定
BIOS SETUP UTILITY
Advanced
2.4 進階選單(Advanced menu)
進階選單可讓您改變中央處理器與其他系統裝置的細部設定。
2.4.1 JumperFree 設定(JumperFree Configuration)
注意!在您設定本進階選單的設定時,不正確的數值將導致系統
損毀。
Configure System Frequency/Voltage
AI Tuning
[Standard]
DRAM Frequency
[Auto]
Select the target CPU
frequency, and the
relevant parameters
will be auto-adjusted.
Frequencies higher
than CPU manufacturer
recommends are not
guaranteed to be
stable. If the system
becomes unstable,
return to the default.
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
Power
Boot
Tools
Exit
Jumperfree Configuration
USB Configuration
TPM Configuration
CPU Configuration
Chipset
Onboard Devices Configuration
PCIPnP
Adjust system
Frequency/Voltage,etc.
AI Tuning [Standard]
本項目可滿足您對於中央處理器超頻的渴望,提供預先設定好的超頻比
率,您只需選擇設定值即可超頻。設定值有:[Manual] [Standard]。
CPU Frequency [xxx]
本項目指定從時脈產生器所產生的頻率數值,送至系0統匯流排與 PCI 匯
流排。中央處理器的運作時脈(CPU Speed)是由倍頻與外頻相乘而得。本
項目的數值由 BIOS 程式自動偵測而得,也可以使用「+」或「-」按鍵來調
整。數值變更的範圍由 100 至 400 MHz。
以下的項目只有在 AI Tuning 項目設定為 [Manual] 時才會出現。