Asus P5B-VM DO Motherboard Installation Guide - Page 74
USB裝置設定(USB Configuration)
View all Asus P5B-VM DO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
2.4.2 USB USB Configuration) USB Advanced BIOS SETUP UTILITY USB Configuration Module Version - 2.24.0-11.4 USB Devices Enabled: None Legacy USB Support Port 64/60 Emulation USB 2.0 Controller Mode BIOS EHCI Hand-off [Auto] [Disabled] [HiSpeed] [Enabled] 在 Module Version 與 USB Devices Enabled None。 Legacy USB Support [Auto] USB Auto USB USB Disabled USB USB Disabled] [Enabled] [Auto]。 Port 64/60 Emulation [Disabled] I/O 連接埠 60h/64h USB 支援的 OS 上使用 USB Disabled] [Enabled] USB 2.0 Controller Mode [HiSpeed] USB 2.0 HiSpeed( 480 Mbps)與 Full Speed(12 Mbps HiSpeed] [Full Speed]。 BIOS EHCI Hand-off [Enabled] EHCI hand-off Disabled] [Enabled]。 2-20 BIOS
²-²0
第二章:BIOS 程式設定
2.4.2 USB裝置設定(USB Configuration)
本選單可讓您變更 USB 裝置的各項相關設定。
在
Module Version
與
USB Devices Enabled
項目中會顯示自動偵
測到的數值或裝置。若無連接任何裝置,則會顯示
None
。
Legacy USB Support [Auto]
本項目用來啟動或關閉支援 USB 裝置功能。當設定為預設值 [Auto] 時,
系統可以在開機時便自動偵測是否有 USB 裝置存在,若是,則啟動 USB 控
制器;反之則不會啟動。但是若您將本項目設定為 [Disabled] 時,那麼無論
是否存在 USB 裝置,系統內的 USB 控制器都處於關閉狀態。設定值有:
[Disabled] [Enabled] [Auto]。
Port 64/60 Emulation [Disabled]
本項目可讓您開啟或關閉 I/O 連接埠 60h/64h 的模擬支援。若要在無 USB
支援的 OS 上使用 USB 鍵盤,則本項目需設定為開啟。設定值有:[Disabled]
[Enabled]
USB 2.0 Controller Mode [HiSpeed]
本項目用來設定 USB 2.0 裝置的傳輸速率模式。設定值分別有 HiSpeed(
480 Mbps)與 Full Speed(12 Mbps)模式。設定值有:[HiSpeed] [Full
Speed]。
BIOS EHCI Hand-off [Enabled]
本項目用來啟動支援沒有 EHCI hand-off 功能的作業系統。設定值:
[Disabled] [Enabled]。
BIOS SETUP UTILITY
Advanced
USB Configuration
Module Version - 2.24.0-11.4
USB Devices Enabled:
None
Legacy USB Support
[Auto]
Port 64/60 Emulation
[Disabled]
USB 2.0 Controller Mode
[HiSpeed]
BIOS EHCI Hand-off
[Enabled]