Asus P5KPL CM User Guide - Page 70

2.4.4 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press to display the sub-menu. Advanced Chipset Settings WARNING: Setting wrong values in below sections may cause system to malfunction. North Bridge Configuration South Bridge Configuration Configure North Bridge features. North Bridge Configuration North Bridge chipset Configuration Memory Remap Feature Configure DRAM Timing by SPD [Enabled] [Enabled] Initiate Graphic Adapter [PEG/PCI] Internal Graphics Mode Select [Enabled, 8MB] PEG Port Configuration PEG Force x1 [Disabled] Video Function Configuration ENABLE: Allow remapping of overlapped PCI memory above the total physical memory. DISABLE: Do not allow remapping of memory Memory Remap Feature [Enabled] Allows you to enable or disable the remapping of overlapped PCI memory above the total physical memory. Configuration options: [Enabled] [Disabled] Configure DRAM Timing by SPD [Enabled] Allows you to enable or disable configurating DRAM Timing by SPD. Configuration options: [Enabled] [Disabled] Initiate Graphic Adapter [PEG/PCI] Allows you to select the graphics controller as the primary boot device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI] Internal Graphics Mode Select [Enabled, 8MB] Allows you to select the amout of system memory used by the Interanal graphics device. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB] PEG Port Configuration PEG Force x1 [Disabled] Allows you to enable or disable the PEG Forec x 1. Configuration options: [Enabled] [Disabled] 2-24 Chapter 2: BIOS setup