Asus P5PEVM Motherboard Installation Guide - Page 40
P5PE-VM ATX Power Connector
View all Asus P5PEVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
7. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up. • Use a PSU with a minimum power rating of 300 W on this motherboard. Use of a PSU with a higher power output is recommended when configuring a system with more power‑consuming devices. The system may become unstable or may not boot up if the power is inadequate. ATX12V ATXPWR P5PE-VM +12VDC GND +12VDC GND +12.0Volts +5V Standby +5.0 Volts +5.0 Volts Power Good -5.0 Volts Ground Ground +5.0 Volts Ground Ground Ground R +5.0 Volts Power Supply On Ground Ground +3.3 Volts -12.0Volts +3.3 Volts +3.3Volts P5PE-VM ATX Power Connector 1-28 Chapter 1: Product introduction