Asus P5V-VM SE DH P5VD2-VM English Edition User''s Manual - Page 38
PCI Express x 1 and External SATA jumper setting - dh wifi ap
View all Asus P5V-VM SE DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
• USB1 and USB2 ports are only for P5VD2-VM. • For P5V-VM SE DH, USBPW12 jumper controls Wifi-AP Solo. Do not change the setting. • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 4. PCI Express x 1 and External SATA jumper setting This jumper allows you to enable or disable the PCI Express x 1 or the External SATA function. Set this jumper to pins 1-2 to activate the PCI Express x 1 function. Set this jumper to pin 2-3 (default) to activate External SATA function. XSW4 XSW3 XSW2 XSW1 ® 2 1 PCIEX1_SLOT PCI-Express and External SATA setting 3 2 E_SATA, SATA_RAID1 (Default) 1-26 Chapter 1: Product introduction