Asus PRL-DLS533 User Guide - Page 146
Installing the lsil driver
View all Asus PRL-DLS533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
C. Existing System Installation NT4 W2K This procedure assumes SCO UNIX is already installed on a hard disk WXP drive. This installation is necessary to build a new UNIX kernel that includes NNW SCO the proper LSI host adapter driver. The basic steps for accomplishing this UNX are outlined below. For more details on UNIX installation, refer to the SCO LNX UNIX System Administrator's Reference Manual. The SCO OpenServer 5 system automatically creates a file unix.safe during installation. To access this UNIX kernel, type after the "boot:" prompt: unix.safe Press Enter. C1. Installing the lsil driver 1. Insert the SDMS BTLD diskette in the floppy drive and type: # installpkg Press Enter to continue. 2. A prompt appears to insert the requested diskette. Since the BTLD diskette is already inserted, press Enter. 3. A prompt asks for the name of the package. Type: lsil Press Enter to continue. 4. If a driver is already present from a previous installation, a prompt inquires about replacing it. Reply y for yes. 5. Once the install package (installpkg) has completed, relink the kernel by typing: # /etc/conf/cf.d/link_unix 6. The system executes the command then prompts for a series of responses: a. "Do you want this kernel to boot by default (y/n)?" Type: y and press Enter. The system backs up the old kernel. b. "Do you want the kernel environment rebuilt (y/n)?" Type: y and press Enter. ASUS PRL-DLS533 motherboard user guide 5-43