Asus PRL-DLS533 User Guide - Page 156
ASUS PRL-DLS533 motherboard user guide, Hardware, Remove Network Device
View all Asus PRL-DLS533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
5.7.2 Intel® Gigabit LAN Driver Installation NT4 W2K Intel Gigabit Network Drivers for UnixWare* 7 and Open UNIX* 8 WXP NNW 1. Make sure no other users are logged on and all user applications are SCO closed. UNX LNX 2. Start the Network Configuration Manager: netcfg 3. Remove any adapters that are configured with the old drivers by selecting the Hardware menu -> Remove Network Device. Exit the Network Configuration Manager. 4. Verify that there is not an older version of the driver on the system using 'pkginfo -l '. For example, enter: pkginfo -l e1008g If there is, remove the driver using 'pkgrm '. For example: pkgrm e1008g Reboot the system: init 6 5. If you are installing the new driver from the CD, follow these steps. Otherwise, go to the next step. Mount the CDROM on the system. For example: mkdir / mount -F cdfs -r /dev/cdrom/cdrom1 / You can install the driver directly from the CDROM or spool the driver from the CDROM so the driver resides on the system. Example of installing the driver directly from the CD: pkgadd -d //UNIX/UW7DDI8/e1008g.pkg Example of spooling the driver from the CD to the system: pkgadd -s spool -d //UNIX/UW7DDI8/ e1008g.pkg e1008g pkgadd e1008g ASUS PRL-DLS533 motherboard user guide 5-53