Asus PRL-DLS533 User Guide - Page 155
To reboot, type this command
View all Asus PRL-DLS533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
NT4 W2K WXP 5. Select the mpt package. NNW SCO The mpt driver on this diskette is then loaded onto the system. UNX LNX The system will again prompt you to load a driver even if loading was successful. 6. Type q (quit) and press Enter. 7. Verify that the driver is now loaded successfully by typing: pkginfo mpt 8. The package information should read: system mpt LSI Logic IHV HBA After the mpt package is loaded, a message may appear that indicates a system reboot is necessary. 9. To reboot, type this command: init 6 During the boot process, the operating system scans the system and lists the devices found. If the kernel panics during boot, reboot the system with the saved copy of the old kernel. Booting from the saved copy of the kernel is described in the next section titled Troubleshooting. If the reboot is successful, the system is ready to use. 5-52 Chapter 5: Driver installation