Asus RAMPAGE IV EXTREME User Manual - Page 94
Primary Timings
View all Asus RAMPAGE IV EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 3 Load Elipida Hyper Profile Change settings to suit Elpida Hyper Profile by selecting Yes. Load Tight PSC Profile Change settings to suit Tight PSC Profile by selecting Yes. Load Loose PSC Profile Change settings to suit Loose PSC Profile by selecting Yes. Load RAW MHZ Profile Change settings to suit RAW MHZ Profile by selecting Yes. Timing Rule 1/2/3/4/5/6 [Enabled] Configuration options: [Enabled] [Disabled] Primary Timings DRAM CAS# Latency [Auto] Configuration options: [Auto] [3 DRAM Clock] - [15 DRAM Clock] DRAM RAS# to CAS# Delay [Auto] Configuration options: [Auto] [4 DRAM Clock] - [15 DRAM Clock] DRAM RAS# PRE Time [Auto] Configuration options: [Auto] [4 DRAM Clock] - [15 DRAM Clock] DRAM RAS# ACT Time [Auto] Configuration options: [Auto] [4 DRAM Clock] - [40 DRAM Clock] DRAM COMMAND Mode [Auto] Configuration options: [Auto] [1 DRAM Clock] [2 DRAM Clock] [3 DRAM Clock] 3-8 Chapter 3: BIOS setup