Asus RAMPAGE V EXTREME U3.1 User Guide - Page 109
DRAM Power Phase Control CHA, CHB/ CHC, CHD [Optimized], DRAM Switching FrequencyCHA, CHD [Auto]
View all Asus RAMPAGE V EXTREME U3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 3 CPU Power Phase Control [Auto] Phase number is the number of active VRM phases. Increasing phase number under heavy system loading can achieve better transient and thermal performance. Reducing phase number under light system loading to increase VRM efficiency [Standard] Proceeds phase control depending on the CPU loading. [Optimized] Loads the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment. CPU Power Duty Control [T.Probe] DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal conditions of every phase component. [T. Probe] Select to set the VRM thermal balance mode. [Extreme] Select to set the VRM current balance mode. DO NOT remove the thermal module. The thermal conditions should be monitored. CPU Current Capability [Auto] Allows you to adjust the total power range for DRAM overclocking. Configuration options: [100%] [110%] [120%] [130%] [140%] [240%] CPU Power Thermal Control [135] Allows you to set a higher temperature to extend the overclocking tolerance and at the same time increase the overclocking potential. DRAM Current Capability(CHA, CHB)/ (CHC, CHD) [100%] Allows you to adjusts the total power range for DRAM overclocking. A higher value provides a wider total power range and extends the overclocking frequency range simultaneously. Configuration options: [100%] [110%] [120%] [130%] [140%] [240%] DRAM Switching Frequency(CHA, CHB)/ (CHC, CHD) [Auto] DRAM switching affects the overclocking range and the system stability. Configure a higher frequency to increase the overclocking range or a lower frequency to enhance the system stability. Configuration options: [Auto] [Manual] The following item appears only when you set the DRAM Switching Frequency to [Manual]. Fixed DRAM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for an increased overclocking range or a lower frequency for an enhanced system stability. Use the or to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. DRAM Power Phase Control (CHA, CHB)/ CHC, CHD) [Optimized] Allows you to enable or disable the DRAM CD settings. [Optimized] Set to the optimized ASUS phase tuning profile. [Standard] The phase control will be based on the CPU command. [Extreme] Set to the full phase mode. ASUS RAMPAGE V EXTREME 3-21