Asus RS100-E8-PI2 User Guide - Page 26
Installing the CPU heatsink, Hardware setup, Using a Philips screwdriver
View all Asus RS100-E8-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2.2.2 Installing the CPU heatsink To install the CPU heatsink: 1. Remove the protection sticker from the back of the CPU heatsink. 2. Place the heatsink on top of the installed CPU, ensuring that the four fasteners match the holes on the motherboard. 3. Using a Philips screwdriver, lightly screw on the heatsink onto the motherboard using all four screws. Once all four screws are attached, tighten the four heatsink screws in a diagonal sequence until the heatsink is secure on the motherboard. A B B A 2-8 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-8
2.2.2
Installing the CPU heatsink
To install the CPU heatsink:
A
B
B
A
3.
Using a Philips screwdriver, lightly screw
on the heatsink onto the motherboard
using all four screws. Once all four
screws are attached, tighten the four
heatsink screws in a diagonal sequence
until the heatsink is secure on the
motherboard.
2.
Place the heatsink on top of the installed
CPU, ensuring that the four fasteners
match the holes on the motherboard.
1.
Remove the protection sticker from the
back of the CPU heatsink.