Asus RS100-E8-PI2 User Guide - Page 96
Serial Port for Out-of-Band Management/Windows Emergency Management
View all Asus RS100-E8-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Flow Control [Hardware [Hardware RTS/CTS] Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a "stop" signal can be sent to stop the data flow. Once the buffers are empty, a "start" signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals. Configuration options: [None] [Hardware RTS/CTS] VT -UTF8 Combo Key Support [Enabled] This allows you to enable the VT -UTF8 Combination Key Support for ANSI/VT100 terminals. Configuration options: [Disabled] [Enabled] Recorder Mode [Disabled] This allows you to enable or disable the Recorded mode to capture Terminal data. Configuration options: [Disabled] [Enabled] Resolution 100x31 [Enabled] This allows you to enable or disable the extended terminal resolution. Configuration options: [Disabled] [Enabled] Legacy OS Redirection Resolution [80x24] This allows you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] [80x25] Putty Keypad [VT100] This allows you to select the Function Key and Keypad on Putty. Configuration options: [VT100] [LINUX] [XTERMR6] [SCO] [ESCN] [VT400] Redirection After BIOS POST [Bootloader] This setting allows you to specify if Bootloader is selected than Legacy console redirection. Configuration options: [Always Enable] [Bootloader] Serial Port for Out-of-Band Management/Windows Emergency Management Services (EMS) Settings These settings specify how the host computer and the remote computer will exchange data. Both computers should have the same or compatible settings. Out-of-Band Mgmt Port [COM1] This item only appears when you set the Console Redirection to [Enabled]. Allows remote management of a Windows Server OS through a serial port. Configuration options: [COM1] [COM2] Terminal Type [VT-UTF8] This item only appears when you set the Console Redirection to [Enabled]. Allows you to set the terminal type for out-of-band management. Configuration options: [VT100] [VT100+] [VT-UTF8] [ANSI] ASCII character set. Extends VT100 to support color, function keys, etc. Uses UTF8 encoding to map Unicode characters onto 1 or more bytes Extended ASCII character set 5-26 Chapter 5: BIOS setup