Asus RS100-E8-PI2 User Guide - Page 37

Get a 3.5-inch Serial ATA HDD and, Secure the 3.5-inch Serial ATA HDD

Get Asus RS100-E8-PI2 PDF manuals and user guides View all Asus RS100-E8-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

1.d Remove the ODD as shown and set aside. 2. Release the four screws that secures the HDD drive tray to the chassis. Set aside for later use. 3. Remove the HDD drive tray. 4. Get a 3.5-inch Serial ATA HDD and the set of bundled screws. 5. Orient the 3.5-inch SATA HDD in such a way that the SATA and power connector are exposed. Secure the 3.5-inch Serial ATA HDD to the HDD drive tray using the bundled set of screws as shown. 6. Connect a SATA signal cable and a power cable from the power supply to the 3.5-inch SATA HDD. Use an L-type SATA connector to connect the 3.5-inch SATA HDD to the motherboard. ASUS RS100-E8-PI2 2-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
2-19
ASUS RS100-E8-PI2
2.
Release the four screws that secures
the HDD drive tray to the chassis.
Set aside for later use.
3.
Remove the HDD drive tray.
4.
Get a 3.5-inch Serial ATA HDD and
the set of bundled screws.
5.
Orient the 3.5-inch SATA HDD in
such a way that the SATA and power
connector are exposed.
Secure the 3.5-inch Serial ATA HDD
to the HDD drive tray using the
bundled set of screws as shown.
1.d
Remove the ODD as shown and
set aside.
6.
Connect a SATA signal cable and a
power cable from the power supply to
the 3.5-inch SATA HDD.
Use an L-type SATA connector to
connect the 3.5-inch SATA HDD to
the motherboard.